EV2-xx0 (4 cassette Sorter)

  • Specifications

  • Power:
  • 220/110VAC    50/60Hz    Single Phase
  • 3 Amp @ 110VAC
  • Grounding:
  • Single Point Low Impedance VAC (provided).
  • CDA/N2:
  • 100 to 120 psi
  • Wafer Size:
  • 4” (100 mm)  thru  8” (200 mm)
  • Weight:
  • ≈ 275 Lbs.
  • Dimensions (W x D x H):
  • 35" x 38" x 72"
  • Options

  • OCR Software w/camera.
  • Bar code reading
  • Multiple size ...
  • Read More

    VWS-x00 (Variable Wafer Sampler Tool)

    Specifications

    • Wafer Size:4″, 5″, 6″ & 8″
    • Weight: 3 – 5 Lbs. Approx.
    • Dimensions: 11.5″ (W) x 10.7″ (D) x 14.3″ (H)

    Features & Benefits

    • Variable Wafer Sampler “VWS”, manually lifts and presents every fifth wafer for easy access to remove or inspect.
    • “VWS” is designed to minimize wafer scratching, breaking, or dumping.
    • “VWS” is carrier orientation specific so that the cassette fits in only one direction.
    • All aluminum parts are black anodized for corrosion resistance.
    Read More

    Flat Aligner Tools (TBM-x00 & AFF-x00)

    Specifications

    • Wafer Size:4″, 5″, 6″ & 8″
    • Weight: 5 Lbs. Approx.
    • Dimensions: 4.5″ (W) x 7.5″ (D) x 3.8″ (H)

    Options

    Features & Benefits

    • Mactronix Top-Bottom Wafer Flat Finder “TBM” is designed for manual flat finder alignment.
    • The patterned side of the wafer never touches the carrier during rotation.
    • The machine may be configured to accommodate a large diversity of Plastic, Teflon, and metal carriers.
    • The aligned wafer flats may be manually positioned to any other orientation desired by slowly turning the roller knob.
    • Uptime will exceed 99.25%.
    • MTBF (mean time between failure): 2,500 hours
    • MTBA (mean time between assist): 1,000 hours
    • MTTR (mean time to repair): less than I hour
    Read More

    Notch Aligner Tools (NFM-x00 & NFA-x00)

    NFA-x00

    Specifications

    • Power: 110-220 V.A.C. 50-60 hertz
    • Wafer Size:4″, 5″ & 6″
    • Dimensions: 5.75″ (W) x 10.2″ (D) x 7.0″ (H)
    • Wafer Size:8″
    • Dimensions: 6.5″ (W) x 12.0″ (D) x 7.75″ (H)
    • Weight: 10 Lbs. Approx.

    Features & Benefits

    • The Notch Finder Automatic “NFA”, automatically aligns wafer notches in either the up or down
      direction.
    • Notch up or down orientation is switch selectable.
    • Notch finding is automatic once the cassette is placed on the notch finder.
    • The patterned side of the wafers never touch the carrier during rotation.
    • “NFA” is carrier orientation specific so that the cassette fits in only one direction.
    • All aluminum parts are hard black anodized for corrosion resistance.

     
     
     
     
     

    NFM-x00

    Specifications

    • Wafer Size:4″, 5″, 6″ & 8″
    • Dimensi...
    Read More

    Manual Slide Transfer Tools (STN-x00 & STM-x00)

    Specifications

    • Wafer Size:4″, 5″, 6″ & 8″
    • Weight: 5 Lbs. Approx.
    • Dimensions: 27″ (W) x 12.25″ (D) x 7.75″ (H)
    Options

    Features & Benefits

    • The Smart Transfer Machine “STN”, manually transfers wafers between two cassettes.
    • Flat alignment is preserved during transfer.
    • Wafers are transferred from one cassette to another without scratching, breaking, or dumping.
    • Batch transfer, all sending cassette wafers are transferred at the same time to the receiving cassette, hence
      rapid transfer.
    • Wafers are never touched for the transfer, preserving wafer integrity.
    • New ergonomic handles have been added to provide maximum grip on either side and the ability to grip the tool with both hands.
    • Additional tubing on the wafer pusher provides a soft contact
    • Static Dissipative version ...
    Read More